S5560 交换机console用户名密码忘记 | 您所在的位置:网站首页 › h3c 5110是几层交换机 › S5560 交换机console用户名密码忘记 |
当用户忘记了Console口密码时,可以重启设备根据系统提示按Ctrl+B进入BootWare主菜单选择,即以忽略系统配置的方式启动,此时设备不会删除原有的配置文件。 Press Ctrl+B to enter extended boot menu... BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled. //如果看到此提示,则表示设备开启了密码恢复功能。 Note: The current operating device is flash Enter < Storage Device Operation > to select device. ====================================================== Boot System Enter Serial SubMenu Enter Ethernet SubMenu File Control Restore to Factory Default Configuration Skip Current System Configuration BootWare Operation Menu Clear Super Password Storage Device Operation Reboot ============================================================================== Ctrl+Z: Access EXTEND-ASSISTANT MENU Ctrl+F: Format File System Enter your choice(0-9): 6 系统出现如下提示表明已经设置成功。 Flag Set Success. 当再次出现BootWare主菜单时,选择,设备开始重新启动。重启设备后,设备的配置为空,可以在系统视图下配置回滚恢复原有配置,如下配置表示将当前配置回滚到配置文件startup.cfg中的配置状态。如果不想恢复原有配置,请跳过此步骤。 system-view [H3C]configuration replace file startup.cfg Current configuration will be lost, save current configuration? [Y/N]:n Info: Now replacing the current configuration. Please wait... Info: Succeeded in replacing current configuration with the file startup.cfg. 在系统视图下设置新的Console口密码,如下配置表示设置Console口验证方式为密码验证,且以密文方式设置Console口的密码为123456。 system-view [H3C]user-interface aux 0 //如果没有aux选项,请选择console [H3C-ui-aux0]authentication-mode password [H3C-ui-aux0]set authentication password cipher 123456 [H3C]save //保存配置 恢复出厂配置 如果关闭了密码恢复功能,当用户忘记了配置的Console口密码时,可以重启设备进入BootWare主菜单选择,即恢复设备的出厂配置,此时设备会自动删除启动时使用的配置文件。 Press Ctrl+B to enter extended boot menu... BootWare password: Not required. Please press Enter to continue.
Password recovery capability is disabled. //如果看到此提示,则表示设备关闭了密码恢复功能。 Note: The current operating device is flash Enter < Storage Device Operation > to select device. ====================================================== Boot System Enter Serial SubMenu Enter Ethernet SubMenu File Control Restore to Factory Default Configuration Skip Current System Configuration BootWare Operation Menu Clear Super Password Storage Device Operation Reboot =============================================================================== Ctrl+Z: Access EXTEND-ASSISTANT MENU Ctrl+F: Format File System Enter your choice(0-9): 5 系统出现如下提示信息,表明已经设置成功。 Because the password recovery capability is disabled, this operation can cause the configuration files to be deleted, and the system will start up with factory defaults. Are you sure to continue?[Y/N]Y Setting...Done. 当再次出现BootWare主菜单时,选择,设备开始重新启动。 重启设备后设备恢复出厂配置。 |
CopyRight 2018-2019 实验室设备网 版权所有 |